Emergency Fault Finding in Newhaven
A fault you cannot see is still a fault. We test each circuit in turn until the readings show what has failed, then repair it with parts from the van, in homes, flats and business units across BN9.
- 24/7 emergency call outs
- Part P registered electricians
Electrical fault finding you can depend on
An electrical fault rarely comes at a good time, and when it does you want a dependable electrician who moves quickly and finds the real cause. Across Newhaven and BN9, our emergency electricians are fault finding specialists, bringing a fast and professional service to homes, flats and business units.
Lost power, a wiring fault or a piece of equipment that keeps tripping the board: our experienced team answers day and night, diagnoses the problem quickly, frequently inside the first hour of arriving, and works towards a fix on that same visit.
Each emergency begins with careful testing using calibrated test equipment. That means isolating the affected circuits, opening up and inspecting the accessories, carrying out continuity and insulation resistance tests and, where it applies, confirming the earth fault loop impedance, so the true cause is known before any repair is suggested.
- Experience17 years tracing electrical faults
- Test equipmentProfessional Megger multimeter
- Finding itUsually in the first hour on site
- PartsStocked van for first visit repairs
- PriceFixed before the repair begins
Breaker keeps dropping out?
Do not keep resetting it. Call 01273 086921 and let us find the cause.
What we find in BN9 homes and businesses
The faults we are called to most often in Newhaven, and how we locate and fix each one.
- Earth leakage tripping the RCD A damp fitting, damaged cable or faulty appliance. Circuit by circuit insulation testing tells us which, and we repair or replace it.
- Short circuits Damaged insulation lets line and neutral touch, tripping the breaker straight away. We locate the damage with testing and replace the affected cable or accessory.
- Water from a flat above Leaks reach ceiling roses and junction boxes. We isolate the wet circuit, test it as it dries and renew anything that has been damaged.
- Lost connections Sockets or lights go dead when a terminal works loose. Continuity readings lead us to the joint, which we remake or replace.
- Three phase and machinery faults Workshops and units suffer lost phases and motor circuit faults. We test each phase and circuit and restore the supply your work depends on.
- Mixed up neutrals Past alterations sometimes share neutrals between circuits, causing unexplained RCD trips. We find the crossed connections and separate the circuits properly.
Professional test equipment, a well stocked van
We test with a Megger multimeter. Its insulation test finds cables and fittings leaking current to earth, and its continuity range is sensitive enough to show a single loose joint on a long circuit.
A non-trip loop test lets us check the earth path on circuits protected by RCDs without plunging the house into darkness, and the RCD tests confirm each device trips within the time the wiring regulations require.
The van is stocked with cable, sockets, switches, connectors, breakers, RCDs and RCBOs for the common consumer unit makes, so we can usually finish the repair on the first visit.
- Megger multimeterPinpoints leaks, breaks and weak earth paths
- Approved voltage testerConfirms circuits are safe to work on
- Leakage clamp meterMeasures earth leakage without switching circuits off
- Cable tracerLocates cables buried in walls and floors
- Van stockParts for the common consumer unit makes
How long fault finding takes in Newhaven
Typical times on site once we arrive. We keep you informed throughout and agree the repair price before we start it.
A faulty appliance
Usually found by unplugging and testing items one at a time.
A dead socket or light
Continuity testing finds where the circuit has broken.
Water in a fitting
Quick to locate, though drying and retesting can add time.
A damaged hidden cable
Readings from several points narrow down the faulty length.
Restoring healthy circuits
We isolate the fault first so the rest of the building has power.
Intermittent and machinery faults
Some need testing while the equipment runs, or a return visit.
How our emergency electricians find the fault
Ring and explain
Tell us what has failed and what was running. It helps us bring the right parts.
Safe isolation
We prove circuits dead, isolate the faulty one and reconnect everything that is healthy.
Pinpoint the fault
Testing with the Megger multimeter narrows the problem to a single joint, fitting or length of cable.
Fix and record
We repair it, test the circuit again and leave you the results.
Faults traced and repaired across Newhaven
Fault finding in Newhaven: common questions
How quickly can you find a fault in Newhaven?
Once we arrive, most faults are found in under an hour. A faulty appliance can take minutes, while a damaged cable hidden in a wall or an intermittent fault takes longer.
Do you fault find on commercial and industrial units?
Yes. We test three phase supplies, distribution boards and machinery circuits on the industrial estates and around the port, and can work outside your hours.
What equipment do your electricians use?
A Megger multimeter for insulation, continuity, loop and RCD testing, plus an approved voltage tester, a leakage clamp meter and a cable tracer.
My lights went off after a leak upstairs. Can you help?
Yes. Keep away from wet fittings and switch off from a dry spot. We isolate the wet circuit, test it as it dries and replace anything damaged.
Will the repair be done on the same visit?
Usually. The van carries cable, accessories, breakers and RCDs. If a special part is needed, we leave everything safe and come back to finish.
Other emergency electrician services in BN9
Tripping Fuse Boxes
Whether it trips once a week or every time you put the kettle on, a tripping board in Newhaven always has a reason.
Read moreSockets, Lights & Wiring
Lights out upstairs, the kitchen sockets dead, or water coming through the ceiling onto a fitting.
Read moreCommercial Call Outs
From units on the Avis Way estate to shops in the town centre and businesses around the harbour, a power failure stops work fast.
Read moreNeed a fault found in Newhaven?
Phone us any time. We will go through what is happening, tell you when an electrician can get to you and find the fault once we arrive.