Homes, flats and HMOs

Emergency Fault Finding in Portsmouth

Converted terraces, flats above shops and shared houses are full of circuits that have been altered many times. Our emergency electricians work through them methodically, find the fault with proper test equipment and put it right.

Call 023 9380 0283
  • 24/7 emergency call outs
  • Part P registered electricians
The problem

Fault finding that gets to the real cause

When the electrics fail in a house, flat or HMO, you need an electrician you can rely on, someone who acts quickly and fixes the cause rather than the symptom. Our emergency electricians are experienced fault finders, providing a quick, professional service across Portsmouth and Southsea at any hour.

Power cuts, faulty wiring in converted terraces and appliances that trip the RCD are all part of the job. Our team is available 24 hours a day to find the fault, in many cases in under an hour on site, and we aim to finish the repair before we leave.

Every call starts the same way: systematic testing with calibrated instruments. We isolate the circuit concerned, check the accessories on it, measure insulation resistance and continuity, confirm the earth fault loop impedance where it is relevant, and only then recommend a repair based on the root cause.

  • Experience17 years on terraces, flats and HMOs
  • Main testerMegger multimeter
  • Time to findMost faults inside the first hour
  • MaterialsCarried on every van
  • PriceAgreed before the repair starts

RCD trips and will not stay up?

Leave it off and call 023 9380 0283. We will find the circuit at fault.

Call now
What we find

Common faults in Portsmouth properties, and the fix

These are behind most of our Portsmouth fault finding call outs. Here is how we locate each one and put it right.

  1. Borrowed neutrals Alterations in converted houses often share a neutral between circuits, so RCDs trip for no obvious reason. We trace the crossed wiring and separate the circuits correctly.
  2. Leaks from the flat above Water finds light fittings and junction boxes on the floor below. We isolate the affected circuit, test it dry and replace anything damaged.
  3. Overloaded sockets in shared houses Heaters and kitchen appliances on one circuit cause trips and hot sockets. We measure the load and split or upgrade the circuit.
  4. Damaged cables in walls Picture hooks, shelves and old DIY damage hidden cables. Readings from both ends of the circuit locate the faulty length for repair.
  5. Failed accessories Worn sockets, switches and ceiling roses lose connections and go dead. Continuity testing finds which one, and we replace it.
  6. Old boards with no RCD protection Some faults stay hidden because nothing trips. Insulation testing shows leaks the old board cannot detect, and we explain the options for an upgrade.
The kit

How we test, and why it matters

We use a Megger multimeter, a professional test instrument that measures insulation resistance, continuity, earth fault loop impedance and RCD performance. In a building with many circuits, those readings are what separate the faulty one from the healthy ones.

Its non-trip loop test lets us check earthing in occupied flats and shared houses without cutting power to everyone, and its RCD tests prove each device disconnects in time, including those protecting electric showers and EV chargers.

Every van carries cable, accessories, junction boxes, connectors, breakers, RCDs and RCBOs, so most Portsmouth repairs are completed on the first visit instead of waiting for parts.

  • Megger multimeterInsulation, continuity, loop and RCD readings
  • Voltage indicatorChecks a circuit is dead before we touch it
  • Leakage clamp meterShows which circuit is leaking while it stays live
  • Cable tracerFinds cables running between floors and flats
  • Stocked vanAccessories, cable, breakers, RCDs and RCBOs
How long it takes

How long it takes to find the fault

Typical times on site for Portsmouth houses, flats and HMOs. You will know what we are doing as we go, and the repair price is agreed first.

15 to 30 min

One faulty appliance

Usually found by testing the items on the tripping circuit.

Up to an hour

A failed socket or switch

Continuity readings lead to the accessory that has failed.

About an hour

Water from the flat above

Locating the wet circuit is quick. Drying it out takes longer.

1 to 2 hours

Borrowed neutrals or hidden damage

Tracing shared wiring through a converted house takes care.

Early on

Power back for everyone else

Healthy circuits are reconnected as soon as the fault is isolated.

Longer

Faults that come and go

These may need testing at the time they happen, or a return visit.

How it works

Finding a fault in a Portsmouth property

Step
01

Tell us the pattern

When it trips, what was on and which rooms go off. In shared houses, tenants often know the clues.

Step
02

Isolate safely

We prove circuits dead, isolate the faulty one and restore power to the rest of the building.

Step
03

Trace it with readings

Multimeter tests separate the faulty circuit from the healthy ones and find the exact point of failure.

Step
04

Repair and certify

The fault is repaired from van stock, retested and recorded, with paperwork for you or your landlord.

Our work

Faults located and repaired across Portsmouth

Emergency electrician fault finding in a Portsmouth flat
Straight answers

Fault finding in Portsmouth: your questions

How long does it take to find an electrical fault?

Most faults in Portsmouth homes are found within the first hour on site. Shared neutrals in converted houses, hidden cable damage and intermittent faults can take longer, and we keep you updated throughout.

Can you fault find in an HMO without cutting power to every tenant?

Usually, yes. We isolate only the circuit we are testing and use non-trip testing where we can, so other rooms keep their power.

What test equipment do you use?

A Megger multimeter, an approved voltage indicator, a leakage clamp meter and a cable tracer.

Our old fuse box never trips. Could there still be a fault?

Yes. Older boards without RCDs cannot detect small leaks to earth. Insulation testing shows whether there is one, and we will explain whether an upgrade is worth doing.

Will you fix it once you have found it?

In most cases, straight away. The van carries the cable, accessories and protective devices most repairs need, and the price is agreed before we start.

On call now

Fault you cannot trace in Portsmouth?

Ring us at any hour. An electrician will talk through the symptoms and give you an honest estimate of when we can arrive.