RCDs that keep dropping out

Fuse Box Keeps Tripping in Portsmouth?

In Portsmouth's older terraces and converted flats, a tripping board is one of the commonest calls we get. We test each circuit, track down the leak or overload and fix the cause.

Call 023 9380 0283
  • 24/7 emergency call outs
  • Part P registered electricians
The problem

Why older Portsmouth homes trip

Many Portsmouth homes have wiring that has been extended and altered many times, especially where houses were split into flats. Every extra joint and spur is another place for a fault to develop, and one fault on a shared RCD can switch off half the home.

Damp is the other big factor. Solid walls, cellars and bathrooms without good ventilation let moisture into back boxes and fittings, and near the seafront salt air speeds up corrosion on outdoor equipment.

Your emergency electrician separates the circuits and tests each one until the problem shows itself, then puts right whichever cable, fitting or connection is to blame. If your board gives poor protection, we will explain the options clearly.

  • Try this firstUnplug appliances on the tripping circuit and reset
  • Still tripping?Switch it off and ring 023 9380 0283
  • ArrivalWe tell you honestly when you call
  • CostFixed price before the repair
  • Better protectionRCBO boards so one fault stays on one circuit

Trips the moment you reset it?

That points to a fault still on the circuit. We can find it.

Call now
What we find

What trips boards in Portsmouth properties

Six reasons Portsmouth consumer units keep tripping, roughly in order of how often we find them.

  1. Altered and extended wiring Poor joints and spurs added during conversions and renovations.
  2. Damp in solid walls Moisture reaching sockets and switches on outside walls and in cellars.
  3. Faulty appliances Washing machines, kettles, ovens and immersion heaters with failing elements.
  4. Bathroom extractors and lights Condensation getting into fans and fittings in poorly ventilated rooms.
  5. Shared RCD protection Older split load boards where small leaks on several circuits add up.
  6. Seafront corrosion Outdoor lights and sockets near the coast corroded by salt air.
How it works

An emergency electrician's four steps to fixing a tripping fuse box

Step
01

Phone advice

We help you try the simple checks before deciding to attend.

Step
02

Separate and test

Each circuit gets its own insulation test, so the faulty one is easy to spot.

Step
03

Know the cost first

You hear what is wrong and the price before any work starts.

Step
04

Repair and prove

The repair is made and the RCD tested so it holds.

Our work

Consumer units sorted across the city

Consumer unit after a tripping fault was repaired in a Portsmouth terrace
Straight answers

Tripping fuse boxes in Portsmouth: common questions

Can you fix a tripping fuse box in Portsmouth today?

Usually, yes. Tell us what trips and when, and you will get an honest estimate of how soon we can be with you.

Does a tripping board mean my flat needs rewiring?

Not usually. Most trips come from one faulty appliance, fitting or cable. We will only mention rewiring if testing shows the wiring itself is breaking down.

My landlord says it is the appliance. How do I know?

Unplug the appliance and reset. If the board holds with it unplugged and trips when it goes back in, the appliance is likely at fault. If it trips with everything unplugged, the wiring needs testing.

Can the RCD itself be faulty?

Yes. RCDs can wear out and become oversensitive, or stop tripping when they should. We test how quickly an RCD operates to check it is working properly.

Will you leave me with power while waiting for parts?

Where it is safe, yes. We isolate the faulty circuit and reconnect everything else so you are not left in the dark.

On call now

Fuse box tripping in Portsmouth?

Ring us at any hour. We will go through the simple checks with you first, and if the board still trips, an emergency electrician will come out.